Linksys Extender Setup – Linksys.extender The Quickest Way To Extend Your WiFi

Linksys extender setup is a simple process that one can complete in a few minutes. To perform setup use Linksys IP. Type your device IP in the search bar of your web browser. Visit the Linksys extender login page and complete your WiFi extender setup with ease.

Basic Requirements of Linksys Extender Setup

  • The first thing is to have a Linksys extender and an active network adapter.
  • Without them, you can’t proceed with Linksys extender login or setup.
  • In addition, you need an ethernet or USB cable to connect the device to your computer.
  • However, there are also other options available such as WiFi.
  • It may work better in some cases.
  • But it depends on what type of connection works best for your situation.
linksys extender setup

Prerequisites For Your Extender Setup

You can connect the extender to a power outlet within the range of your router or access point. You may need an extension cord if you’re not near one. If you have multiple extenders, do not connect them to a power outlet in a distant room.

Power on both devices by pressing the ‘On’ button on each of them. Wait for the lights to turn on. In case they don’t, try again after checking the power outlet and power cycling both devices. To perform a power cycle, unplug them from their power source and wait 30 seconds before plugging them back in.

Now that you’ve connected the devices, it’s time to check to see if they’re receiving enough power. Make sure that both the extender and router are plugged into an outlet and turned on. You should see a light on the front of your device that indicates whether it has power and is working properly.

If this is not the case, try plugging them directly into their respective outlets. Make sure no other electrical devices are plugged near them. This is because sometimes these devices have trouble receiving signals due to interference from nearby electronics.

If you still can’t get things working correctly, try unplugging all of your electronic devices for 30 seconds. Then plug everything back in again. This usually fixes any issues with connection strength at home.

Now Start The Setup Process WiFi Expansion Has Never Been This Easy

Simply follow the steps given below and get your Linksys WiFi extender setup in no time. Note: You must follow the instructions in the given order. Else, there are chances of setup errors. If this is your first time extender setup, follow all instructions carefully. Execute them in the same order as they appear on the screen. Select a location where you will place your extender. Choose a location near your router and modem.
  • Open your web browser, type in the address bar, and press Enter.
  • Use your Linksys account’s username and password, then click Log In.
  • Confirm that you have the correct router model number by checking the product sticker on the bottom of your device;
  • Then click Next.
  • If you had an extender before, overwrite all previous settings and select Start Over.
  • Click ‘Get Started’ from Extender Setup Page
  • Link your Linksys accounts together via WiFi Protected Setup (WPS) method or manually enter pass-codes into both devices before proceeding further.

Configure Your Extender Using Wireless Setup Method

  • To configure your extender using wireless setup method, from Linksys Extender Setup Page, enter your device’s MAC Address.
  • The MAC address is a unique number that identifies your device. It can be found on the product sticker that came with your extender.
  • Then, type in your username and password for Linksys extender login credentials.
  • Here, the user name is the email address that you use to log on to the router.
  • If you don’t remember it, contact your ISP (Internet Service Provider) to get this information.
  • Now, use your wireless network’s security password in the password.
  • If you haven’t changed the default setting yet, then use “admin” as your password here.
linksys wps method

Note: The credentials are case-sensitive. However, you can try typing the username in lowercase letters during the installation process of the extender setup wizard.

Complete the WiFi Extender Setup Process

Linksys WiFi Extender setup is not a difficult process. The given screenshots and images make it easy for any user to setup his Linksys Extender at home or office. The Linksys wireless extenders are used to extend your WiFi connection for better coverage and speed all over your house without any interruption of signals. If you have any doubts feel free to ask questions so that we can help resolve them out soon as possible

  • Follow all instructions carefully to complete the setup process successfully.
  • Use a stable internet connection when connecting your device to your router or other network devices.
  • Make sure that your extender is within the range of your router and connected to a power outlet at all times during operation, as well as when setting up the device for first-time use (unless you have an Ethernet cable).
  • Check to see if you have enough power by pressing one of the white buttons on top of your extender until it turns green.
  • Then try resetting it again by pressing any button on top of it until all four lights turn blue after about 5 seconds. If this does not work, restart both devices.

How To Setup Linksys Extender Without Computer

You can setup your Linksys extender without a computer. You can do it using your smartphone, tablet, or any device with a web browser. Things to Prepare: Before you can setup your Linksys extender without a computer, make sure you have the following: Your linksys extender, network cable (also known as an Ethernet cable) and a mobile device with an internet connection.

Linksys Range Extender Setup Without Computer

  • Connect the extender to your router using an Ethernet cable.
  • Plug in the extender and wait for it to boot up, then connect your device(s) to it via WiFi or Ethernet connection.
  • Log in to your Extender
  • Open the web browser and type the address of your extender in the address bar:
  • Enter the username and password on your extender:
  • admin or password
  • Add Your Network Settings
  • To add your network settings, enter your wireless network name.
  • Enter your password.
  • Select the type of encryption you are using (NONE, WEP or WPA/WPA2), then click Next to continue.
  • Click Next to start setup and wait for it to finish connecting to your router and update its firmware.
linksys range extender

Setup Your Linksys Extender Through App

linksys extender app

If you want to setup the extender using your Linksys Application:

Connect the extender to a power outlet. Wait for the red LED light on top of the extender to turn solid green after 3-5 minutes of connecting it with the power source. Open Linksys App on your Android or iPhone device. Go to Settings> Network & Connectivity >Extenders >Add/Edit Extenders >Select Setup Wizard. Then, follow the instructions given by the mobile app to complete the installation process.

Linksys Extender Configuration for iPhone & Android

Users can configure and setup Linksys WiFi range extenders through both iPhone and Android. To do so follow the given steps.

Open Your Web Browser

  • If you’re using any of the following browsers, open them on your phone or tablet.
  • You can use Internet Explorer, Google Chrome, Mozilla Firefox, or Safari.
  • Make sure your web browsers are up to date.
  • If possible, first clear the cache and cookies.
  • Also, delete the temporary files.

Access the Default Address of Linksys Extender

  • To access the default address of Linksys Extender, you have to type Linksys extender IP in the URL bar of your browser.
  • Make sure that your extender is connected to the router, as well as turned on.
  • If you need to setup your extender manually, use its default IP address:

Click on New Extender Setup

  • Once you click on New Extender Setup, you will see a list of extenders.
  • Select your Linksys Extender’s model number from the drop-down box and click Next.
  • You’ll then see an option to scan for available WiFi networks and/or enter network credentials manually.
  • Choose any one, then follow the instructions on the setup wizard to complete the setup process.

Select Your Linksys WiFi Range Extender’s Model Number

  • Tap the Settings app icon on your device, then tap WiFi.
  • Make sure WiFi is on and tap the name of your Linksys range extender that you want to configure, which should be located at the top of this page.
  • On this page, select your Linksys range extender’s model number.
  • Proceed with the instructions given on the setup wizard to complete the extender setup process

Once done, you can use your iPhone or Android device to extend the WiFi signal using your Linksys WiFi Range Extender. Moreover, you can also use your phone as a hotspot and connect all of your devices to it.

Linksys Extender Configuration Through Window Or Mac

The process of Linksys range extender setup through Windows or Mac is simple. Just follow these steps:

Access Linksys Extender Setup Page

You can access the Linksys WiFi Extender Setup page by following these steps:

  • Go to the Linksys website at
  • Click on Support, then click on extender setup.
  • On the next page that opens, check if your extender is in the “Find your device” box that appears.
  • If not, enter its model number in the search bar at the top right corner of this page and click Search.
  • Also, you can scroll down further to view other available models.
  • Then click Get started (or Download) under Configure Your Network Extender

Login to Linksys Range Extender Setup Page

You can login to the Linksys range extender setup page by following these steps:

  • Visit and click on “Register Now”.
  • Under the “My Profile” section, select the “Setup Wizard” link.
  • On the left side panel of your screen, click on the “View My Devices” link from the “Devices” tab.
  • Choose the correct extender model. Click Next.
  • Choose the correct network name and enter the password for your router, then click Next.
  • Select your Home Network Name and Enter the Password.
  • Click on next to move to the next step

Click “Start” to Setup Your Extender

Click on “Start” to begin setting up your extender. Connect to your range extender using the WiFi name and password provided by Linksys, then click “Next”. If prompted, enter a name for this network connection (for example, Home). Then select the network type from among those listed in the drop down menu: Home, Work, or Public Place.

Connect Your Range Extender to Your WiFi Network

  • Use the default SSID and password to connect the extender to your WiFi network.
  • The default SSID is linksysext and the default password is admin.
  • You can change these in the Linksys Max Smart Setup wizard later on.
  • If you want wireless devices connected with the extender to be able to talk directly with each other, they need to be on the same subnet as each other (or use a router between them).
  • This means that if you have a laptop on an existing 192.168.2 subnet and add this device, it will connect directly but not communicate with any devices outside of that subnet (e.g., 192.168.*).

The process of configuration for both Macintosh and Windows are the same, except for a few different steps. Now you have successfully configured Linksys Extender on Mac and Windows.

linksys smart wizard

Can’t access Linksys Extender setup page?

The Linksys Extender setup page is a admin page that allows users to setup their extender for the first time. If you can’t access this page, then this means your browser is not connected to the extender network.

To connect your device and access the Linksys Range Extender setup page:

  • Make sure that you are using a WiFi-enabled device with an internet connection (WiFi or Ethernet).
  • Find out what mode your router is currently in (access point, repeater, or wireless bridge) by visiting its website or calling customer support
  • Try to access the extender setup page using a wired connection.
  • If you are accessing the Linksys WiFi Extender setup page on another computer, say your friend’s computer or your neighbour’s, then make sure that there is no firewall or antivirus software blocking access to a setup page.
  • Make sure that you have connected the extender with power and checked whether it is working properly by using different web browsers like Chrome, Mozilla, Internet Explorer or Safari, etc. Clear cache and cookies from the browser if required because sometimes these problems can be fixed by clearing cache in browser settings.

The Linksys WiFi extender setup is simple, and you can complete it with or without a computer. You just need to follow the above steps.

Linksys Extender Setup – How do I connect my Linksys Wi-Fi extender to a new Wi-Fi?

The process of connecting your Linksys Wi-Fi extender to a new Wi-Fi is simple and takes only a few minutes to complete.

First, make sure that your new Wi-Fi router has been set up and is connected to the internet. You can use the Internet Connection Test to confirm that your network is working properly.

Next, plug in your Linksys Wi-Fi extender and wait for it to power on. The power light will turn green when it’s ready for use.

Use one of the Ethernet cables included with your Linksys Wi-Fi extender to connect it directly to your computer using an available port on the back of your computer or router. Once connected, open up a web browser and type into the address bar.

You will be asked for a username and password before you can access the settings page for your device: enter admin for both fields then click Login. You’ll see a page with various options; under Network Settings, select Wireless Mode, then choose 802.11b/g/n from the dropdown menu.

Linksys Wi-Fi Extender Not Connecting?

You’ve unpacked your new Wi-Fi extender, but the Linksys WiFi extender setup not showing up? Don’t worry, this happens most of the time. Just follow these steps, and you’ll be back online in no time.

Keep Wi-Fi extender Near Your Router

The most common reason why your Wi-Fi extender won’t connect is that it’s too far from your router. If the extender is connected to a router but can’t reach the signal, you may need to move the extender closer to get a signal.

The best place for a Wi-Fi extender is usually in the same room as your wireless network’s central router. This will ensure that the Wi-Fi signal has maximum range and strength throughout your home or office space. You can also place an indoor model next door or across from each other, depending on your building or house size.

Enable Wi-Fi Before You Begin Linksys Extender Setup

The first thing to check is whether Wi-Fi is enabled on your device. To do this, open the Start menu and click on the Control Panel. In the Control Panel window that opens up, click on Network and Internet. In the left pane of this window, select Network and Sharing Center.

In the central part of this window, you should see three different tabs:

  • Home Networking (if it’s not visible, click on Change Adapter Settings),
  • Change Advanced sharing settings.
  • Manage wireless networks.

Change The Electrical Outlet

Connect your extender to another outlet if your router is plugged into an electrical outlet. If you have more than one router in your home, you can use any of them for this purpose.

Confirm Whether the Extender is Wired or Wireless

If you’re using a wireless extender, you’ll need to connect it wirelessly to your router. You can do this in two ways:

  • Using the Wi-Fi Protected Setup (WPS) button on both devices. Pressing this button will initiate a mutual identifying process. It allows the devices to communicate with each other and set up a connection between them.
  • Connect via an Ethernet cable and configure each device manually by entering settings into each one’s web interface. For this, you’ll have to check their manuals for Linksys range extender setup instructions.

If you have a wired extender, you’ll connect directly to your router via an Ethernet cable and configure your Wi-Fi settings as usual.

Change the Wireless Channel on Your Router And Extender

If your Wi-Fi extender is still not working, you can check what channel the router and extender are using by following these steps:

  • Access your router settings by typing in the IP address of your router (usually into a web browser on any computer connected to your network.
  • Click Wireless Settings in the menu bar along the top of the page to access wireless settings for your router if this option isn’t already visible on screen.
  • Scroll down until you see Wireless Channel, select it. Then click Apply or Save Changes after tweaking the settings.

Linksys WiFi Extender Setup – What Does Orange Blinking Mean on My Linksys Extender?

Orange blinking on your Linksys extender means that it is unable to connect to the wireless network. There are a few different reasons why this might happen, but here are the most common ones:

  • Your extender does not have an IP address. If you don’t know what this means, then we recommend that you check out our article on how to find your IP address.
  • You have not connected your extender to a router using an Ethernet cable. This is required for the extender to work correctly with your WiFi network. For more information about how this works and how to set it up, please see our article on connecting your extender to your router via Ethernet cable.
  • The firmware version on your extender needs updating (this happens automatically when you connect it via an Ethernet cable). For more information about how this works and how to update the firmware on your device, please see our article on updating the firmware on your Linksys device.

If you’re having trouble connecting to your router, try resetting the extender by unplugging it and waiting 30 seconds before plugging it back in again. If this doesn’t solve the problem, proceed through these steps:

  • Reset your router by unplugging it for ten seconds and then plugging it back in again.
  • Unplug your extender from its power source and wait thirty seconds before plugging it back in again
  • Reset both devices by pressing their reset buttons for five to ten seconds until they power down completely (they should not turn on automatically).
  • Wait at least two minutes for both devices to fully reboot before trying to connect them again.

Having Trouble Connecting to Linksys WiFi Extender?

If you can’t connect to a Linksys Wi-Fi extender, try these steps:

  • Check the status of your Wi-Fi extender. Make sure that it’s connected and turned on. If necessary, press the WPS button on the back of the router to restart it.
  • Check whether your computer is connected to your router’s network. To do so, open Windows Networking or System Preferences in Mac OS X and select “WiFi” from the sidebar menu at the left. If you see connections available for both 2.4 GHz and 5 GHz networks, then proceed with the next step.
  • Otherwise, try connecting manually using this guide from Apple (Windows) or here from Microsoft (Mac).
  • Check whether other devices (such as tablets or phones) are able to connect to the same wireless network as yours by going into its Settings area and looking under Wireless & Networks > Wi-Fi > Advanced Settings.
  • It should say “connected” next to one of those two frequencies listed above if successful. If not, Make sure there aren’t any conflicting channels in use by nearby neighbors broadcasting their own signals. These signals could interfere with yours too.

Linksys Extender Connects But no Internet?

Many people have found that their Linksys Extender Connected But No Internet. This is a common problem and is usually caused by a few different things.

First, you should check to see if your router is connected to the internet. If it is connected but not working properly, then it’s likely that your router needs to be reset. To do this, unplug your router for at least 10 seconds before plugging it back in again. This will reset the settings of your router and allow you to start over Linksys range extender setup.

If this does not work, then you may be experiencing an issue with your ISP (Internet Service Provider). While this is rare, it can happen from time to time. In this case, you’ll want to contact your ISP and let them know that there is an issue with their service. They’ll likely ask you what kind of issues you’re experiencing and will likely ask if there’s anything specific about those issues that stand out more than others (such as if they only happen during certain times of the day or on certain days).

Linksys Extender Setup No Internet Issues?

If your Linksys Extender is connected to your network but you have no Internet access, there are a few things you can try.

  • Check the Ethernet cable connecting your router and extender. Make sure it is plugged in securely at both ends. If it is loose, try tightening the connection by gently pulling on the cable until it clicks into place.
  • Check to see if there are any LEDs lit up on the front of your extender that indicate there’s an issue with its connection: if so, try unplugging it for ten seconds and plugging it back in again. If this doesn’t work, there may be an issue with your wireless network (see step 3).
  • If you still don’t have internet access after following steps above, check to make sure that your wireless settings are correct for your home network by going into your Linksys router’s settings page (usually found at and making sure that they match what’s written on the bottom of your device (if not, change them manually).
  • If these steps didn’t work either, you may need to reset your router entirely. Note that, this will clear all stored passwords and settings so you’ll need to re enter them when performing the Linksys extender setup.