Linksys Velop Red Light Issue? Fix It Easily!

Although the Linksys Velop WiFi app allows one to manage the network, through which you can monitor its working and connectivity. But, there can be some cases in which you will start getting Linksys Velop red light issues unexpectedly. That situation can be worsened if you are unable to recognize and resolve the error yourself.

There can be any technical bug in Velop, nodes, and networked devices or the network can be faulty for sure. Which can cause you to face no connectivity or Linksys Velop red light condition. But, the troubleshooting points that are listed below will help you to get that Linksys Velop Node blinking red error fixed in less time. All you need to read and use them appropriately on your Velop network. Let’s get started with the process.

While choosing the best location for your Velop and node, keep in mind to verify that there is no interference from other devices. Your house’s electrical appliances and other metallic things can create disruptions in the Velop network. Which include microwave ovens, Bluetooth devices, gaming consoles, cordless phones, and many others. As these devices have the capability to absorb WiFi signals from Velop due to their radiofrequency waves. So, avoid placing all these objects away from Velop to avoid Linksys Velop red light error.

Although the Linksys Velop comes with a multi-device connecting feature, you can attach a number of devices to its network. But sometimes, the many devices’ connectivity can create the network more crowded and congested. As a result, there will be slow internet speed and frequent disconnected issues along with the Linksys Velop red light. So, try discarding those devices that are actually connected to the network but not in use currently. You can check the list of networked devices through the Linksys WiFi app.

While checking the connected device list on the app, make sure to verify whether there are unauthorized users or not. As weak network security can allow external users to simply guess the password and overuse the network too. If there are any then try to remove them by setting a new and strong password. Ensure to make the password hard to guess by adding some numeric, upper, lower-case, and capital letters. As you do that, those unauthorized users will log out from the network, and also the Linksys Velop red light error as well.

In another case, the outdated firmware version of Velop can lead you to get Linksys Velop red light issue definitely. As these technical things require the latest software version to perform well, you must take this point into account. Possibly the firmware version is outdated and requires to be updated. So, check the version on which Velop is running currently and look for the latest updates on the web management portal.

If there is any new version available, then get that on your networked PC and stay on the same page for the further process. Afterward, upload that file there and click on the Firmware Update option. But, don’t turn off your PC and Velop while doing the process. Once the updating process is finished, reboot the Velop and node once. As a result, Velop will be successful in removing the Linksys Velop red light error.

If still, the Linksys Velop keep going red then there might be any fault in older configured settings. You might use the inaccurate login and other credentials while setting up the Linksys Velop. Which is making Linksys Velop red light conditions continuously. In that case, you will require to discard those previous settings and do the Velop setup again by using the details accurately.

To get the Velop on its actual default state, reset it by using any process from two different options. As there are two reset processes available such as from the web management portal and by pushing the reset button.

Reset From Web Portal

In this approach, access the web management window by searching for Velop’s default web or IP address. Then, go to the wireless settings and choose the Factory Default option under the administration tab. As you click on that option, the reset process will start and take some time to complete. Lastly, do the Velop configuration again by using the app or Linksys Velop setup without app method. This process may resolve the Linksys Velop Node blinking red issue.

Press The Reset Button

On the contrary, use and press the reset button from the Velop’s bottom panel to carry out the process. Hold the button for at least 5 to 7 seconds and check the reset LED on the panel. The blinking LED will indicate that the process is going on and once that is complete, the LED will turn solid. Thereafter, check the Linksys Velop red light issue after configuring the Velop and node.

To avoid the Linksys Velop blinking red error further in Velop, take some consideration points into account. Try to place the main node at the center of your place and another node in the WiFi dead spots. Make sure the distance between both is minimum and these are away from your home appliances. Use the latest ethernet wire while connecting the Velop and node together for better connectivity. This process may resolve the Linksys Velop Node blinking red issue.

Apart from that, try using the details perfectly such as the login credentials, and web/IP address. It is advisable to go through Velop’s manual guide once to get to know the LED specifications. Also, there must be a strong connection between the Velop and your device whether that is wired or wirelessly. Finally, use the Linksys WiFi app to manage and monitor the Velop’s working often.

Thus, you will succeed in getting the Linksys Velop red light error fixed after using these troubleshooting tips. However, if you face this situation again and can’t solve that on your own, then take help from our technical experts immediately.