Linksys RE6500 Setup

The front LED of the Linksys RE6500 range extender offers you information about power and WPS. Using the WPS button, the Linksys RE6500 device automatically connects with the existing router.

Power LED Status

Before coming to the Linksys RE6500 setup part, let’s learn a bit about the Power LED Status. The Blinking white power LED stays when your Linkysys RE6500 extender device is turned on. The solid blue LED determines that your extender device is ready to use. When the Linksys RE6500 extender device can’t establish the network connection, the blinking amber LED starts flashing for two minutes.

Back View Of Linksys RE6500 Device

At the back side of the Linksys RE6500 gadget, you can see the four buttons.

• The on/off button.
• WPS button. (WiFi Protected System button)
• Ethernet port.
• Audio port.
• Reset Button.

Try this method, if your client device asks you to fill in or enter the Linksys extender pin.
On the client gadget, write the extender pin which is listed on the WiFi-protected setup screen. (Pin is also written on the tag or the bottom of the Linksys RE6500 device) When the connection is successfully done the WPS LED of the Linksys RE6500 extender is solid. Now, within two minutes tap OK on the Linksys RE6500 extender WPS screen.

• To begin with, settle Linksys RE6500 extender power plugs into a wall socket.
• Next, attach your Linksys RE6500 extender device to the router LAN port by an ethernet cable.
• Following this, join the Linksys RE6500 setup network to the computer.
• After that, open the web crawler and enter the IP address 192.168.1.1 or web address extender.linksys.com in the find bar.
• Later, for the AP mode, create the WiFi network name and security password.
• In the end, study all the on-screen instructions shown.

The site survey offers you a snapshot of all the neighbouring access point modes.
To visit the site survey page you will need to go to the Linksys RE6500 extender web management page. After that, tap on the wireless tab and then click on the site survey page.

Linksys Extender not connected or setup won’t work is common and can take place due to several different reasons. Give the following steps a try as they might help you get rid of the actual problem.

• Verify the position of the Linksys RE6500 extender and router.
• For the first-time configuration, you will need to locate the extender and router closer to each other.
• Try different locations for the router and extender, to reduce the signal obstructions.
• Does not locate your extender and router closer to metal objects and reflective surfaces such as glass or mirrors.
• If you are using the WiFi Protected system button then wait for a few minutes until the WPS LED indicator stops blinking before trying to make a connection again.

• Verify your computer and Linksys RE6500 extender must be linked with each other.
• See the LED status of the Linksys RE6500 extender.
• Turn ON/OFF your Linksys RE6500 range extender.
• Enter the right web address while visiting the web-based portal.

One of the most popular data networking brands in the USA, Linksys has made the reset feature available to almost all of their devices, be it a router or extender. Linksys RE6500 is no exception. It also has a reset feature that a user can utilize to reset the settings of the device to default. Generally, this feature is useful in situations where your device is not functioning well or the Linksys RE6500 setup won’t work and no trick works to fix it.

In case your Linksys RE6500 device creates problems, you can give the reset feature a try. Linksys RE6500 Reset process can resolve a variety of complex issues, from basic connectivity problems to complex configuration glitches. Here is how you can perform a reset and get your Linksys RE6500 device working smoothly again.

When to Perform Linksys RE6500 Reset

A reset becomes a must when you notice persistent issues with your device. The issues could be anything such as sudden drops in network connectivity, slow internet speeds, or difficulty accessing the web portal of the device. You should go to the reset option when trying everything but nothing worked to fix the Linksys RE6500 setup issue that you are facing.

Types of Reset For Linksys RE6500 Device

There are two main ways to do a Linksys RE6500 reset: a soft reset and a hard reset. The choice depends on the severity of the issue you’re facing.

• Soft Reset

The first step you should take is a soft reset. It’s a simple and quick procedure. Find the reset button, which is usually on the side or back of the extender. Hold the button down for roughly 10 seconds. During this time, the extender’s LED lights will flicker, indicating that the reset is in progress. Release the button when the blinking stops. Your extender will then restart. In most circumstances, you should notice increased performance following this Linksys RE6500 reset.

• Hard Reset

If the soft reset does not address the problem, a hard reset may be required. This will reset the extender to its original settings. Find the reset button again and press and hold it for at least 30 seconds this time. The LED lights will alternate between blinking patterns. When the lights have stabilized, release the button and allow the extender to finish the reset procedure. Keep note that a hard reset will delete any customized settings you have on the extender.

Steps Following the Linksys RE6500 Reset

Your Linksys RE6500 will be reset to its default settings after the Linksys RE6500 reset. This means you’ll have to re-configure it to meet your tastes and network requirements. Connect to the extender’s default Wi-Fi network and use a browser to view its web-based Linksys RE6500 setup page. To configure the extender with your network’s settings, follow the on-screen instructions.

If you want to improve the performance of your Linksys RE6500 extender device then you will need to improve the Linksys extender device software.

• First, go to the Linksys RE6500 extender web management page.
• Now, select the extender software upgrade option under the firmware upgrade.
• After that, wait for a short while to install the latest firmware file on your laptop or computer.

Thus, with the help of this method, you will successfully improve the performance of the Linksys RE6500 extender. If not then try another method.

By doing the reset method you will easily boost the extender performance. The reset hole button is located at the bottom of the Linksys RE6500 device. Press that button with the help of a paperclip for 8 to 10 seconds. Now, all the LEDs of the Linksys RE6500 extender will turn off. Therefore, it means your Linksys RE6500 extender device is now completely reset.

Note: After the reset process, you will need to do the Linksys RE6500 setup process again.

With the assistance of this Linksys RE6500 setup page, you will be able to learn all the basic information about This Linksys extender device. In case you have any type of question/query/doubts in your mind then discuss them with our Linksys team experts by sending our doubts to [email protected] or by +1 716-992-6371.