Linksys Velop MX5300 Setup

The Linksys MX5300 Velop is a Whole Home WiFi 6 System. It uses the latest technology Wi-Fi 6 802.11 standards to send Gigabit speeds of up to 5.3 Gbps with 12-stream capacity throughout the entire home or office. Follow the steps below to learn how to do the Linksys Velop MX5300 setup process.

How To Access Into Linksys Velop MX5300 Login Page

  • Initially, take any Wi-Fi-containing device.
  • Now, write an web address in the URL bar of the WiFi-containing gadget.
  • Next, tap on the mobile phone pic and tap continue to go on the Linksys smart WiFi link.
  • Further, enter all the account information.
  • Hence, after doing the all above steps you will successfully visit the router dashboard.
Linksys MX5300 Velop

With the assistance of the apart method, you will successfully do the login process of the Linksys MX5300 velop device.

Basic Needs For Configuration

  • Require modem or gateway with an active internet connection plan.
  • Need a smartphone for the Linksys velop configuration.
  • Must require android 6 or a high version.
  • The version of the Linksys application 2.10 and next for the configuration.

Linksys Velop MX5300 Setup

  • First, open the Linksys application on your mobile phone and tap on the launch setup.
  • After that, switch on the Bluetooth button. (Bluetooth button is only used for the configuration process of Linksys velop MX5300 device).
  • Moreover, read all the terms and conditions and tap on the allow button.
  • Next, your Linksys velop device will look for the other nodes.
  • Once the node is detected, the solid purple LED starts flashing. Hit on yes, if the LED blinks purple.
  • Linksys velop device will now detect the internet connection.
  • Further, by filling in the email ID and security password in provided fields, you will easily create a Linksys account. To proceed, hit on the create account. In case, if you already have a Linksys account then fill in all the credentials which are shown on the screen.
  • As of now, the device will link with your account (It will take a minute).
  • Personalize your home network by creating a WiFi name and security password.
  • Once it is done, tap on next.
  • The Linksys application will be configured with the Linksys velop network.
  • Now, choose the node name and hit on next.
  • On the success display, tap on later.

With the help of this method, you will successfully do the Linksys velop MX5300 Setup without facing any trouble.

  • After this method, you can easily change many things in your Velop device.
  • Create a new network name and security password.
  • Attach the device to the WiFi network with the help of the WPS button.
  • By doing parental control, you will easily block the internet.
  • See the speed of the internet connection.

Note: Hence, after the Linksys velop MX5300 setup if you are facing any issues then follow the lower solution tips.

Upgrade Linksys Velop MX5300 Software

To fix the disconnecting issue of the Linksys Velop MX5300 device upgrades the software.

  • To start with, download the latest software file of Linksys velop on your computer.
  • After that, you will go to the Login page of Linksys MX5300 velop.
  • Furthermore, tap on the internet connectivity option.
  • Thereafter, pick that downloaded firmware file.
  • In the end, tap on the start button and wait for a few minutes to upgrade the Linksys velop firmware completely.

Reset Linksys Velop MX5300 Device

Reset Linksys Velop MX5300
  • Initially, look for the reset hole button on the Linksys MX5300 device.
  • Afterward, push the reset hole button. (It is located at the bottom of the Linksys Velop MX4200 device).
  • Now, push the reset hole button with a hairpin for 8 to 10 seconds.
  • Lastly, wait for a few minutes to see if all the LEDs will turn off.
  • Hence, your Linksys MX5300 device is now completely reset.

Note: After the reset of the Linksys MX5300 velop device you will need to do the Linksys velop MX5300 setup again.

Top-Indication Of Linksys Velop LED

The light on the top of the Linksys velop device provides information about the node’s operation.

  • A blinking blue LED means your Linksys velop device is starting up.
  • When a solid blue LED starts blinking solid then it means your velop device is perfectly connected.
  • The configuration process of Linksys velop MX5300 is in the working process when the purple LED starts flashing.
  • The device is now ready for the setup process when a solid purple LED starts flashing.
  • When your device continuously disconnects then it determines the red blinking LED starts flashing.
  • You will fail to get the internet connection from the modem, due to the solid red LED starting to blink.
  • The yellow LED means you will not receive a strong WiFi signal.

Bottom-Indication Of Linksys Velop LED

At the bottom of the Linksys velop device, you can see the three LED buttons.

  • Power button: By pushing the power button your Linksys velop MX5300 device is turned on.
  • WiFi Protected System button: With help of this button you can do the configuration process in less time.
  • Reset button: By which you can easily fix any issue.

After reading this page, if you have any queries or doubts in your mind regarding the Linksys Velop MX5300 setup or login process then you will need to contact our team experts via an email ID or by phone number +14084778750.


Qus:- Which Method Is Easy To Configure Linksys Velop MX5300 Device?

Ans:- By installing the Linksys application you can easily do the Linksys velop MX5300 setup in less time. You can easily download this Linksys application from the google play store. After installing, you will need to fill in the credentials which are shown on the page.

Qus:- Can I Attach Linksys Velop MX5300 To A Switch?

Ans:- Linksys velop MX5300 device can easily connect with the managed and unmanaged switch.

Qus:- How Can I Use Linksys Velop As A WiFi Extender?

Ans:- The Linksys Velop MX5300 mesh WiFi extender permits you to locate the nodes closer to smart home devices and it is very difficult to reach places like the garage and halfways.