Linksys range extender devices are known for their reliable network coverage, seamless roaming and better performance. You can add linksys re1000 range extender to your home or office network. Whether you are dealing with dead zones, weak signals or need better coverage, with the Linksys RE1000 Setup you can bridge all these gaps. Desire to set up a range extender? Need help? Just walk through this guide. Grab a detailed setup process using all the available methods. Also you can check the troubleshooting guide to resolve common errors.

Embark on the Linksys RE1000 installation of hardware after unboxing the device and accumulating the significant items. Installation process includes following steps:

Placement

Firstly, look for a placement to keep your range extender device. You can place this range extender device on the table as well as connect it directly on the wall socket. While choosing the placement make sure to keep the range extender within the range of the host router device. Also there should be no additional devices placed that might interrupt the network. For the initial Linksys RE1000 Setup it is advised to keep the router and extender proxy to each other. Later you can relocate the extender to optimize the performance.

Powering

Once placement of the linksys re1000 range extender is decided, you have to boot up the device. There are two ways to connect the linksys re1000 with power. You can directly plug the device into the wall outlet using the wall plug adapter. Another way to connect the device with power is using a power adapter for desktop or table placement. For opting this method of linksys re1000 boot up you need to change the power plug configuration. Follow the steps mentioned here to change the power plug configuration:

• Take the linksys re1000 range extender and remove the AC plug off the extender by pressing the plug release latch, then slide the AC plug.
• Now you have to cover up the area using the power connector cover.
• Then inject the AC cable to the power connector.
• Afterwards connect the adapter to the power outlet and turn on the power.

Once the Linksys range extender turns on, wait for the LED to get stable so you can initiate setting up linksys re1000.

Setting up linksys re1000 range extender is a very straightforward process. Anyone can conveniently initiate the setup using any of the further specified methods. Check the step by step guide of all three setup methods from here.

CD Based Setup

CD based Linksys RE1000 Setup requires a computer/ laptop device and setup CD you got with the extender along with the host networking device.

• First of all you have to turn on your computer/ laptop device.
• Insert the CD into the CD port and make sure your computer is connected to the network router.
• Now, initiate the setup when Setup utility starts by reading the license terms.
• Click on the next option and then you need to look for the SSID of your host router from the list that appears.
• Moving further enter the password and click on the OK option.
• Now you have to select the next option and your Linksys RE1000 setup is ready to use.
• You can relocate the extender to optimize the network performance.

Web Based Setup

Setting up linksys RE1000 using the web is not a tough process. You have to begin the setup by using a laptop/ computer device, ethernet cable and host networking device.

• First of all you have to take your laptop/ computer device and connect it to the range extender device.
• For this connection you have to use ethernet cable (preferable) or wireless network information.
• Default wireless network details are specified on the device label or in user guide.
• Now, when connection is done you have to launch a web browser of your choice
• Go to the address bar and mention extender.linksys.com or IP to proceed further in the Linksys RE1000 Setup process.
• Now use the default admin account details. Leave the admin field blank and mention admin in the password field to get access.
• Click on the login option and you will be able to use the range extender settings.
• Here you have to configure the settings, connect the extender to the router by searching its SSID.
• Mention the host router password and then click on apply option.
• Also you have to make changes in the SSID & password of the admin account and wireless network to keep the network secure.
• Furthermore you have to update the device firmware to boost up the performance.
• Finish the linksys re1000 setup and relocate the device for network optimization.

WPS Based Setup

Setting up Linksys RE1000 using the WPS button is a super easy & quick way to configure the extender. Check here the steps which you have to follow to add the extender into your existing network:

• After installing the device hardware you have to initiate the Linksys RE1000 Setup
• Press the WPS button of the RE1000 device first.
• Simultaneously press the button on the router device.
• Wait for the device to connect with the router.
• Monitor the extender’s LED to verify the connection.
• This whole connection process takes less than 10 minutes.

Linksys RE1000 Troubleshooting

You might encounter some connectivity errors with your Linksys extender setup. Errors like your extender is connected but no internet, sudden connection drop, unable to connect extender network and more. You can easily get your network back on track by following linksys re1000 troubleshooting. Check here the troubleshooting tip you have to follow:

Verify Connections

Firstly, you have to verify that the connections are ok or not. It means first check if your extender is connected to the host router internet. To verify this you have to use an ethernet cable. Plug-in the cable directly into the router’s ethernet port and connect it with your laptop. Confirm that the internet is working or not. If the internet is not working then you have to connect your ISP for a solution.
Secondly, you have to check the hardware connections. Damaged cables or devices in the network also create issues. So, you have to replace the damaged cable to get rid of the issue. Also confirm that the cables are connected securely. In case any cable is loose then also it creates interruption in your linksys re1000 setup.

Linksys RE1000 Reboot

Rebooting the linksys range extender might help in resolving the issue. Rebooting may take about 5 minutes. To initiate the reboot you have to turn off the power supply of the range extender. Wait for around 30 seconds and then plug-in the power again. Now, let the linksys re1000 reboot properly. Then verify whether the issue you were facing persists or not.

Linksys RE1000 Firmware Update

Next you can try out linksys re1000 firmware update. Outdated firmwares create trouble in the network. Resolving technical glitches and fixing bugs is very important for smooth performance of extender. With the firmware update you will also be able to enjoy the latest features. Updating firmware involve following steps:

• First of all you have to get access to the Linksys extender login page.
• Afterwards, go to the settings and look for the administration option.
• Search for firmware update option further and then choose it.
• You can update firmware online by choosing online updates
• Also you can do the update via manual method.
• Follow the on screen guide to complete the update.
• Reboot the device once and then check if the issue is resolved or not.

Linksys RE1000 Reset

Reset linksys re1000 is very simple. It resolves several connectivity issues as well as configuration issues. Remember this step will erase all the changes you made in the device settings. Also uninstall all the updates. So do it only if you are aware of the setup process. You can perform linksys RE1000 reset using any of the two ways.

• Button based reset: Press the reset button for about 10-30 seconds and then release it. Wait for the device to reset. Afterwards you have to do the setup of the range extender again.
• Web based reset: For web based reset you need to access linksys extender login page. Afterwards go to settings and look for the factory reset option. Follow the screen guide to erase all the configuration settings and then you need to perform Linksys RE1000 Setup again.