192.168.1.1 IP


Most WiFi devices such as WiFi extenders have a default IP address 192.168.1.1. If you want to use the extender, you will need to setup a network connection between your extender and the router. The IP address is used to define this communication process. An IP address is a unique identifier that allows any device on the Internet to communicate with each other. This includes your extender, computers, and any other devices you connect to the internet. After the configuration, you can find your extender’s IP address in the DHCP table.

What is the IP address of Linksys Extender?


The Linksys Extender is a wireless network extender that uses its own IP address to allow devices in its range to connect to the internet through it. The IP address of Linksys Extender is the unique identifier that allows it to communicate with your extender.

The IP address of Linksys Extender identifies a computer or a device on a network. The default IP address of Linksys Extender is 192.168.1.1. It is a unique number that identifies each device on your network and makes it easier for you to connect with other computers or devices. It also facilitates the proper functioning of the network. Additionally, it allows you to access the settings portal of the WiFi device for the Linksys extender setup process.

How to login at 192.168.1.1


The IP address of your Linksys extender is 192.168.1.1, and you can use this IP address to log in to your extender and configure it. To access the login page (extender.linksys.com) using this IP address, use your web browser on your computer. The below steps will explain how you can access the configuration page of your extender via the IP so that you can customize its settings according to your requirements and preferences.

  • First, plug your modem into an electrical outlet.
  • Next, make sure to connect the internet cable from your ISP to the back of your modem.
  • Now, connect your extender to an electrical outlet.
  • Then, connect one end of its Ethernet cable to one of its ethernet ports on the back side (with labels 1–4)
  • Connect the other end of the cable to either an open port on your computer.
  • Thereafter, F=from a browser window, enter 192.168.1 in front of any URL and hit Enter.
  • In order to log in, you need to enter the username and password.
  • The username is admin, while the password could be blank (this depends on your extender).
  • Click OK when you’re done entering these details.
linksys extender login
  • Now, you’ll be inside your extender’s administration panel.
  • To log in to your extender’s configuration page, you must type in the username and password.
  • Remember, both of these credentials are case-sensitive.
  • After entering your credentials correctly, you will be able to see all of your extender settings on a new screen.
  • This allows you to make changes or view information that would otherwise not be available.

Note:- In case you changed the default username and password before, type it in and hit enter again to get into your extender’s configuration page. You may also be able to log in via FTP. With these steps, you will be able to easily log into your extender’s configuration page.

Can’t Access 192.168.1.1?


If you’ve setup your Linksys extender and are having trouble accessing it, there could be one of a number of reasons why. Here’s how to identify what might be causing the issue, and how to fix it:

Linksys extender

Check The Connection

The first thing you need to do when troubleshooting your Linksys extender is to make sure it is connected properly. If you are using a wireless connection, make sure that:

  • Your router should connect to the extender with an Ethernet cable.
  • The power outlet is working fine.
  • The Ethernet cable is plugged into the correct port on each device.
  • The firmware is up-to-date.

Verify The Login Information

Make sure you’re not mistyping the address. If you’re using a name, check that it’s correct. Also, if you’re using an IP address instead of a name, try logging in again with a different browser. Additionally, check – are there any network issues? These are usually caused by a problem with your network or extender settings. Go to your extender settings and make sure everything is working correctly and nothing has changed since when the error started occurring!

Check The URL

If you are not connecting to the correct URL, this can cause errors. Make sure that you are typing in the correct URL: 192.168.1.1. If you have entered your username and password correctly but still cannot connect, check your extender’s user manual to make sure it is setup correctly.

linksys router login

Examine Every Connection

Check all the connections. Make sure that your modem is connected to the extender with an Ethernet cable. Then connect to the wireless network on your computer. If there are any issues with your device recognizing this access point, please check its documentation.

Still Can’t Connect to 192.168.1.1?


If you’re still having trouble connecting your Linksys extender, it’s probably an issue with your extender. Try these steps:

Linksys extender setup not working

Reset Your Device

It is wise to reset your Linksys extender to factory settings. To reset your extender, unplug it from the wall and leave it unplugged for at least 30 seconds. Plug it back in, wait for all three lights to stop blinking, and then reboot your computer. If you are still having issues, try resetting your modem and upgrading the firmware of both devices.

Update The Firmware

If you’re upgrading your firmware, do it on a wired connection. Because if you have an error that prevents the upgrade from completing, it’s easier to troubleshoot from a wired connection. In addition to simply being more reliable than WiFi connections, a wired connection also allows for more precise troubleshooting.

Use a Different Browser

In Chrome:

  • Click on the menu icon in the upper right-hand corner of your browser
  • Select Settings from this drop-down menu
  • Scroll down to “Advanced Settings” and click on the Network tab at the top of this window
  • Under “Request timeout” select 0 seconds (this will allow any page or file to load even if it takes a while)

And then click “Apply” at the bottom of this window. This will reset your network settings and allow you to browse the internet again.

linksys router login

Unplug and Replug in Your Extender

To resolve this, you should perform the following steps. Unplug the extender from its power source, and wait for a few seconds. Plug it back in. Wait for it to reboot.