Fix No Internet Issue

While perfectly using the Linksys device, get errors like No Internet all of a sudden? Don’t be worried as this is a common issue and even can be resolved easily and shortly. In this blog post, we will suggest some of the usual reasons behind this situation and the solutions as well. So, keep reading this information.

Verify Internet Plan

The first and foremost step here is to check the internet plan whether is active or expired. Maybe you have ignored this point but sometimes this simple thing creates the No Internet issue. So, contact directly to your ISP and verify this. Also, update the internet plan if there is any excess requirement for the internet. As most of the time, extra networked devices make the network speed crowded. If that is active and still you get no internet error then move to the next step.

Check The Connection

Another thing to verify is the connection between the modem and the internet provider device. Ensure that the modem is well-connected to the extender and is getting stable signals. If it is not, then change the location of the modem and place it closer to the extender. Keep in mind that the distance between both devices neither should be too close nor should be too far.

Power Cycle Your Router

If the above method doesn’t work for you then try restarting the modem. As there might be overheating in the device and it starts showing No Internet issue. This approach can fix an issue such as a temporary outage. To do this, remove the modem from the power source and remain it removed for some time. Later, plug the device in again and join your devices to it.

Now, try to access the internet again on the networked device. Further, check the connection between the networked device and the modem. Sometimes, devices can accidentally connect to someone else’s network which can cause internet issues. So, verify the network name and password and be sure that your device is connected to the right network.

Reset The Modem

The other foolproof solution left here is to choose the reset process of the modem. However, before starting the reset process, collect and note down the SSID network password as the previously configured settings will be discarded by this process.

• In order to do this, disconnect the networked devices from the modem first.
• Only take the modem and locate the reset button on its panel.
• Once you locate that, press it till its reset light starts blinking.
• Leave and let the modem perform the reset process and blink.
• After completing this process, you will need to configure the device again.
• Visit the web-based portal or install the official app to do that.

Examine Network Settings

If the issue still persists, then there might be any changes in the modem’s network settings. Go to the modem’s default web-based portal and advanced settings to verify those. Ensure that the previously configured settings must be accurate. Further, check whether both frequency bands are active or not. Activate both bands if your modem supports the dual frequency bands.

On the other hand, open the control panel on your networked PC and click Network and Sharing Center. Next, tap on the Change Adapter Settings and go to the properties. Select Internet Protocol Version 4 and click properties immediately. Lastly, see the Obtain an IP address and DNS server automatically options are selected.

Thus, use these solving points to Fix No Internet Issues, as these will surely work to fix that. However, if these are not, then take more relevant solutions from our Linksys support technicians. They will handle and solve your queries in less time.

---