How to Perform Factory Reset and Linksys Range Extender Setup

Live Chat

Live Chat with our experts & get real-time answers to all your queries.

Chat Now

Let’s Talk

Call us to discuss your Linksys issues with our experts and get the solution.

linksys range extender setup

As the name implies, a Linksys WiFi Range Extender extends the network range of a router. However, this is not the only role it plays. It also significantly contributes to boosting the speed, increasing stability, and enhancing the security of a router’s network. Once installed properly and performed the Linksys Range Extender Setup correctly, you can enjoy an improved internet connection all over your home with this premium range extender. However, you might face a variety of problems while installing, setting up, or connecting your Linksys Range Extender. Common issues with this state-of-the-art data networking technology are usually related to extender setup and reset. And sometimes, they are frustrating.

If you know the right steps to execute a Linksys Range Extender Setup or Reset process, you can readily get rid of these types of issues. But if you are not aware of it, you need not worry. This comprehensive guide is for you. Here, you are going to learn how to reset and set up your Linksys range extender correctly in quick steps.

Let’s get started.

Why Do You Need to Factory Reset Your Linksys Range Extender?

First things first, why you need to reset your Linksys range extender is important to know. Resetting is the process to restore your Range Extenders’ settings to defaults. You need to perform this process if you experience these scenarios:

Consider Factory Resetting Your Linksys Range Extender in These Scenarios

  • Connection lost at regular intervals
  • An issue with setting up the device
  • An issue with establishing a connection to a smartphone or computer
  • No SSID or network name found
  • Error pages show up while using the internet
  • An error shows up while entering the username and password on the login page

Usually, restarting your range Extender or performing a Linksys Range Extender Setup solves these types of issues. But you may need to perform a Linksys Range Extender factory reset process to fix these errors.

Let’s dive into the next section where you will be learning the steps to factory reset your Linksys Range Extender.

Resetting Your Linksys Range Extender to Factory Default Settings

Before resetting your range extender to factory default settings, it is always a great choice to have a backup of your device’s configuration settings. You simply need to head to the setup page of Linksys using a browser. Locate the “Management” tab. You will find a “Backup Configurations” option under this tab, click on it to enter the next user interface. Now you simply need to click the “Save’ button. A backup of your device’s configuration settings will automatically be created in no time. Now it is safe to move ahead to the factory reset process.

Linksys provides two different resetting options for its Range Extenders including Reset Button and Web-Based Factory Reset quite similar to Linksys range extender setup options. Obviously, the Reset Button is the go-to resetting option for anyone who wants to reset their Linksys Extenders. This is because it is a super easy and quick option. Here we are unwinding both Linksys range extender resetting options for you below.

Steps to Reset Your Range Extender Using Reset Button

Step 1- Plug in your range extender to an active power source and then power it on. Press the On/Off button to do that. The button could be either in the front, rear, or bottom panels of the device (depending on the extender’s model).

Step 2- Press the “Reset Button” and hold it for up to 10 seconds. Your device’s settings are most likely to be restored in a couple of minutes.

Step 3- The final step is to power off your device, wait for up to 2 minutes, and then power it on again. That’s all, your device’s setting is now as it was when you bought it.

Web-Based Resetting Steps

Web-based resetting process is not as simple as the “reset button” method is. However, it is not complex as well. You need to perform only four steps to restore your Linksys extender’s settings to factory default settings. Here are the steps:

Step 1- On your phone or computer, head over to your favorite browser you usually use. Enter the default IP address or setup address on the search bar to visit the setup page. Or simply visit http// to know how to get started.

Step 2- On the setup page, you will find the “Administration” tab. Locate the “Factory Defaults” under this tab and click on it to move ahead.

Step 3- Now you need to click the “Restore Factory Default” button right away.

Step 4- Finally, you need to power off the device and then power it on again after waiting for a couple of minutes. That’s all. Your Linksys Range Extender is now restored to its factory default settings.

You have now got how to factory reset your range Extender from Linksys. Now, let’s find out some basic steps to perform Linksys Range Extender Setup in the next section of this post.

Linksys Range Extender Setup Assistance

Performing a Linksys WiFi Range Extender Setup is not straightforward but not complex as well. You need to do this before using your extender.

There is an Exatender’s manual that you will receive in your Linksys Extender box. You can use that to complete the Setup Procedure. But in case you find it difficult, feel free to contact us straight away. Our support team will assist you with this.

Here we are sharing the steps to perform a Linksys Range Extender Setup with you. However, you need to ensure that you are ready with all the pre-requirement which are:

  • SSID of Your Network
  • Wireless Channel
  • Password or Network Key

Steps to Perform Linksys Range Extender Setup

Step 1- Establish a connection between your computer and the range extender using an ethernet cable. Attach the cable to the WAN port of the extender. You can also simply connect to the internet connection without the use of an ethernet cable.

Step 2- Provide a power supply to the extender and wait until the power LED gets stable.

Step 3- Open your favorite browser on your computer and enter the IP address of your router in the search bar. You can also type this or http// to enter the setup interface.

Step 4- A user interface with a section of “Username and Password” will open up. Ignore the “User Name” block and enter the default password which is “admin.” Then click on the “Login” button to proceed further.

Step 5- Your Linksys Extender Setup will be completed automatically in a few seconds.

These are just a few basic steps to set up your Linksys Extender device. In case you find it difficult to perform, contact us right away. We are always happy to assist you with our quality remote technical support. One of our tech support specialists will attend to your queries and provide you with the appropriate solution right away.

Wrapping Up

That’s all from this informative write-up. We hope you have learned a lot from this and it would certainly be useful for you. You will now be able to factory reset the extender and perform a Linksys Range Extender Setup process easily. Contact us right away if you need instant support for any technical errors in your network system. We would be more than pleased to provide you with our remote tech support.

Disclaimer:- is an online platform where we address different issues related to Linksys extenders and routers. We operate independently and we do not have any sort of accreditation with any manufacturer or third-party brand. The product images, illustrations, brand names, logos, and trademarks used on this page are only for informational and referential purposes. We provide our services only on users’ demand.

    Send Your Query