Linksys RE6500 Blinking Red? Fix It Easily!

No doubt, you might start getting a Linksys RE6500 blinking red error suddenly while using the extender network. Also, you won’t be able to resolve that if you are literally a non-technical person. But, we have got some troubleshooting tips regarding this, that you can try out for your network’s issue. These points will surely help you to get the extender working fixed.

Check The Device’s Connectivity

Foremost of all, try to check the connection between the Linksys extender and your existing router. A weak or intermittent connection can be a reason behind the Linksys RE6500 blinking red issue. So, your extender must be connected strongly to the router with stable signals. In other words, your extender must be within your router’s range.

Apart from that, verify your device’s connectivity, and ensure that your device is attached to the official network, not to any other one. Also, if there is any wired connection, the ethernet wire must be capable enough to transfer the signals. In simple words, that cable must be the latest and in working condition as well.

Extender Requires Reboot

The continuous usage of the extender can be a possible cause for that error. So, in this case, try to power cycle the extender once as giving some rest to the extender might help a lot. So, keep this device unplugged for a few minutes and fix it again into the power socket which should not be broken. Also, check the power socket’s working, that must be capable enough to provide a stable power supply.

In addition to that, try to choose a different placement for the extender that must be central to your house. Keeping the extender in the middle of your place will help you to get WiFi coverage throughout every corner. Try to keep your electrical appliances such as microwave ovens, Bluetooth devices, cordless phones, and other gadgets away from the extender to prevent signal interference.

Check For Firmware Update

If still, the extender blinking red continuously, check for the firmware updates on the Linksys WiFi extender setup portal. As updating the firmware will help you to remove the technical bugs from the network and the red light issue. So, check the update’s availability on that portal according to your extender model. Save that file on your PC after downloading that and carry out the updating process from the same page. Later, reboot the extender again and check if the Linksys RE6500 blinking red issue is resolved or not.

Change Advanced Settings

Along with updating the firmware version, check the extender’s advanced settings also. Use http//extender.linksys.com to access the management window and go to the wireless settings option. Check the bandwidth channels and swap them if there is any requirement. The crowded channels can make the extender’s working sluggish and the light issue. Moreover, check the number of devices that are actually connected to your network and try to log out the unauthorized users if there are any on your network. Change and set a new SSID name and password for your network to avoid those external users.

Reset The Extender

If none of the above-mentioned points work for your extender network error, then try resetting it. Doing so will allow you to remove the error and the configured settings as well. So, choose any method from the two reset processes and reset the extender.

Reset From Management Portal

In this process, you will be required to access the management window and go to the Factory Restore option. But, before performing the process, make sure to collect the configured details of the extender. As you will require to do the Linksys RE6500 setup again after resetting it. Click on that option and let the PC perform the extender reset process.

Reset By Pushing The Button

In any case, if you are inaccessible to the web management page, you can prefer to push the reset button. Locate the dedicated reset button on the extender’s panel and press and hold that for a few seconds. As you do that, the extender will start resetting itself and start showing an ideal color on the panel. Soon, the process will be complete after turning the stable LED color.

Thus, carry out the setup process again after the reset process, and the blinking light issue will resolve now. If it is not, then don’t think more to get in touch with our technical experts. They will walk you through more troubleshooting points to get that error fixed in less time.

---