Why Do My Linksys Nodes Keep Disconnecting?

Getting nodes’ intermittent connectivity problems continuously? Though this can be a common case, there will be several technical issues behind this. You might be unable to solve that due to the velop mesh setup complexity. But, we are going to mention some troubleshooting tips in this blog, that you can try out to get the strong connectivity back. Check them out and apply them to your velop precisely.

Reduce Signal Interference

The foremost reason behind your question “Why do my Linksys nodes keep disconnecting” are interruptions in signals. That can be due to the channels overlapping, interference from electrical appliances, or any other thing. Verify these points separately and try fixing them using these troubleshooting tips.

Change Bandwidth Channels

In this case, your Linksys velop might be running on similar channels to your cordless phones or nearby devices. As a consequence, the frequency channels are overlapping and create the connection dropping issue. So, try to change your velop’s channels from its web management portal. Go to the Linksys velop setup page and choose the wireless settings option after the login process.

There, you must prefer to select 1 to 11 channels as the default channel is 6, and click on the save button. After doing this, reboot the velop once and make the connections again. Alternatively, you can find out the best channels from the WiFi app dashboard. Open the Linksys app and look for the Channel Finder feature and tap Scan Channels to get better channel suggestions. Also, this feature will set the channel automatically without requiring your involvement.

Keep Obstructions Away

Moreover, try relocating the velop away from things that can absorb the signals or can create barriers in the signal-transfer process. Which includes the thick walls of your house, fish tanks, and metallic and electrical appliances. Also, thai can be from your smart TV, CCTV, microwave, and refrigerators. So, make sure any of these items are not closer to velop that can interrupt the WiFi signals.

Placement Of Velop

Along with those points, the location of the velop plays a major role in signal transfer and connectivity. In fact, the wrong placement can lead you to face velop devices not connecting to closest node case. Always place the main node centrally in your house and other satellites in the corners for maximized WiFi coverage. Additionally, ensure to place them as high as possible from the ground. There must be a two feet distance between the floor and the velop so try to place it on the upper-most floor.

Change Network Advanced Settings

Apart from changing channels of the network, make some modifications to other parameters. Such as setting a new SSID network name and a different password for the velop network. More than that, it is advisable to enable the WPA-2 and WPA-2 security encryption. In doing so, your network will create a stable and strong connection to the networked device along with better security.

Update The Velop Firmware

Last but important, check for the latest firmware version availability of your velop to update it. This will help you a lot to get rid of unstable internet signals as there will be no technical bugs remaining in the network. Reach the Linksys extender login page first and reach the wireless settings later. Select the Administration option and see the latest version of your velop model.

Download the file on your networked PC and access the same page again to update the firmware. Keep in mind to let the PC and velop turn on during the updating process. Reboot the velop finally, if there is a requirement, and make the connections again. However, keep in mind the above-mentioned points while connecting the velop to your devices to avoid the same error further.

Reset The Velop

If still, you are struggling with intermittent connections, then discard the currently configured settings of the velop network. Doing so will enable you to remove the errors and the installed settings as well. Find out the dedicated reset button on the Velop’s bottom panel and use a paperclip if required to press it. Let the velop reset the settings and wait for some time as it might be a time-consuming process. Lastly, configure the velop again using the web portal or the WiFi app.

Now, confirm that you are done with your “Why do my Linksys nodes keep disconnecting” error. If still, the error persists, then contact our technical experts and let them fix the issue within minutes.

---