How Linksys RE7000 Setup Eradicates Dead Zones?

Linksys re7000 setup operates on dual frequency bands. Thus with this you can fetch high speeds of N300 on the 2.4Ghz band and AC1733 Mbps speeds on the 5GHz frequency band. Particularly this re7000 wifi signal booster can easily cover an area of upto 10,000 square feet. So it effectively eliminates not only dead zones but all other connectivity issues from every single corner of your home. So if you got your hands on a re7000 wifi range extender then for grabbing all its benefits, conducting the right Linksys re7000 setup is non-negotiable. Therefore, in this blog-post we’ll share two easy and reliable setup methods. 

Easy Wifi Protected Setup

For Linksys re7000 setup via WPS there is one major requirement. The requirement is that your router should offer WPS compatibility. In case it doesn’t, then you can directly check out the second setup method. So the steps for wifi protected setup method are as follows:

✓ First plug the re7000 wifi signal booster in an electrical outlet near the router. Switch it on. Wait for the front interface LED to glow up. 

✓ Now, push the wifi protected setup button on the re7000. You’ll now notice, the front interface LED is flickering. 

✓ Without taking more than two minutes, take a turn towards the router and push its wifi protected setup button as well. 

✓ Finally, the router as well as the Linksys re7000 wifi signal booster starts the collaboration. It completes when the smart lights on the gadgets stabilize and turns green. 

✓ Lastly, you can wrap up the Linksys re7000 setup by repositioning the range extender to a more thoughtful place. 

Note: Experts recommend placing the signal booster halfway from the router, possibly where the signals are not less than 50 percent and halfway from an area of concern (dead zone). Additionally, if you want the re7000 setup to work incredibly then avoid its placement in a congested area or where there are too many physical barriers like walls, furniture, electrical and metal objects. 

Installation Using Web GUI

The Linksys re7000 setup using a web browser is simple and allows for more in-depth configuration. The steps for it are:

• Plug in the re7000 into a well working switchboard. Turn it on. 
• After the repeater boots up properly, fetch your laptop. Activate its wifi. Now look for the Linksys Extender Setup-XXX SSID. Tap on it to connect.
• Thereafter, on the same laptop open the internet browser. To avoid unnecessary problems with the Linksys re7000 setup ensure the browser is up-to-date. Additionally clear up its caches and cookies folder. 
• Move towards the browser’s URL field. Enter http://extender.linksys.com. Press Enter. Tap on the Start Setup option. Select between two modes. As you select it the interface will show up the SSID of your router’s network. Tap on it and then fill up the accurate password to extend the network’s reach. Thereafter you can personalize different settings and tap on Save/Apply before you log out of the interface. 

---