How To Configure Linksys RE6800 Wifi Range Extender?

Linksys range extenders are extremely popular. One of its popular models is RE6800. It is a dual band range extender that comes with a simple wall plug design. This compact range extender can easily boost the wifi range upto 9000 sq. ft. area. The extender inhibits spot finder technology. Thus the Linksys RE6800 setup becomes easier because effective deployment of the device is extremely crucial. Up next, the extender is also equipped with the advanced beamforming and cross band technologies. The presence of the WPS button further makes the installation completely hassle free. Lastly, the front panel smart indicator helps you with understanding the exact working of the extender. Now to learn about the Linksys RE6800 setup process, keep on reading.

Setup Requirements

For setting up Linksys RE6800 you need only a few components. These are:

• RE6800 extender. 
• A smart device. 
• An Ethernet cable (optional). 
• Next up a vacant power outlet. 
• Thereafter the router that has its connection to the internet source. 
• Lastly, you need details of the current network. You just need the username and the password. 

Install Extender Using Web Browser 

The first and most used method for Linksys RE6800 setup is web GUI based. Here’s how the setup is done using web browser:

• Directly plug the RE6300 wifi signal booster into the well working power outlet. This outlet should be in the center of the router and the wifi dead spot. After plugging in, power on the extender. Initially the extender’s smart light will blink orange so you have to wait for it to turn green. 
• Now grab the smart device. For further configuration you have to pair up this device to the RE6800 extender. For pairing either use the ethernet wire or you can pair up using default wireless details that are written on the RE6800’s back panel. 
• Once the connection is formed, open up the internet browser. You can use any latest and up-to-date browser like chrome, internet explorer, firefox, safari and edge. Then go to the URL field and type in the Linksys RE6800 setup login address. It is http://extender.linksys.com. As you type it click on Enter. 
• Now tap on Start New Setup. The interface will ask you to choose the mode. So select repeater mode. Then it will prompt you to select the network whose signals you want to strengthen and extend. Do so and then fill in the password of the chosen network. Thereafter you can personalize the network details and wrap up the setup. 
• Once the installation is complete, just pair up the device to the newly created network and test the connection. If the signals aren’t that strong then reposition the extender till you get the desired results. 

One Push Connect 

If you do not have any security concerns and also need to do the Linksys RE6800 setup at the earliest then you can use the WPS method. The steps for it are as follows:

• Plug the signal booster close to the router and power it on. 
• Once it boots up press the WPS key from the side panel. The front indicator will start fluttering. 
• So immediately move to the router and activate its WPS button as well. 
• Now just wait for the indicators to go from flickering green to stable green. This means the installation is done and now you can reposition the extender for better signal transmission. 

Still have queries related to the Linksys RE6800 setup? If yes, no worries as our customer support team is there for your assistance. So connect anytime. 

---