How To Setup Linksys Velop In Bridge Mode?

Linksys Velop is whole home mesh WiFi system. This system is designed to provide stable and consistent wireless coverage. If you already have a functioning router at home and desire to use velop with the router then it’s very simple. Following the Linksys Velop bridge mode setup you can easily add the device without any technical expertise. This setup allows Velop to operate as an access point instead of a router. This will help to expand your WiFi range without disrupting your existing network. Follow the detailed guide below to complete the bridge mode configuration step by step.

What You Need to Begin

To start the Linksys Velop bridge mode setup, make sure you have the following:

• Linksys Velop mesh nodes (1 or more, depending on your space)
• Power adapters for each node
• At least one Ethernet cable
• Your existing modem router combo already functioning
• A smartphone or tablet with the Linksys app installed

Initial Setup of Velop System

Before enabling bridge mode, the Velop mesh system must be set up in standard mode first. Follow these steps to get started:

• Boot up the main velop node by connecting it with a power outlet using the adapter.
• Form a link between velop & your router using an Ethernet cable.
• Linksys app available for download. Get it from Google Play Store or the Apple App Store as per the OS you are using.
• Launch the app and create or log in to your Linksys account.
• Follow the app’s instructions to complete the initial configuration.
• Create your WiFi name and a secure password to protect the network.

Make sure this initial step is fully completed before switching to bridge mode. This is crucial for a successful Linksys Velop bridge mode setup.

Activating Bridge Mode in Linksys Velop

Once the standard setup is done and your Velop system is up and running, you can begin the Linksys Velop bridge mode setup using the Linksys app. Here’s how:

• On your smartphone or tablet, launch the linksys app.
• From the main Dashboard, tap on the Menu (usually shown as three horizontal lines).
• Select Network Administration or Advanced Settings, depending on your app version.
• Select the connection type option and then Bridge Mode from the list.
• Confirm the action when prompted.
• Wait while the system reboots and applies the changes.

Once your Velop system reboots, it will now be operating in bridge mode. 

Add Additional Nodes to Expand Coverage

Now that the Velop system is in bridge mode, you can begin adding more nodes to extend WiFi coverage throughout your home. Here’s how you can add additional nodes after completing the Linksys Velop bridge mode setup:

• Put the additional Velop node in the range of the primary node or router.
• Boot up the additional node using the power adapter
• Pause the process until the LED starts to blink.
• Rush to the linksys app again and let it detect the node.
• Follow the app instructions to complete the setup of the new node.
• Repeat the process for each additional node you wish to add.

Ensure the distance between nodes is not too far to maintain a strong mesh network signal.

Positioning the Velop Nodes Correctly

The effectiveness of your Linksys Velop bridge mode setup largely depends on how well you position the Velop nodes across your home. Use these basic guidelines to get the best results:

• Put the primary velop near the router it’s connected to.
• Keep the other nodes in range of the primary node.
• Avoid placing the nodes near thick concrete walls or in corners.
• Steer clear of placing the units next to microwaves, cordless phones, or metal furniture.

Correct positioning ensures that the signal is strong, seamless, and reaches every corner of your space.

Test Your Connection

Once all the nodes are configured and placed properly, it’s time to verify if your Linksys Velop bridge mode setup is working as expected:

• Link a phone or computer to the Velop WiFi network using the network ID & passcode you just form.
• Move around the house and check the signal strength at various points.
• Open websites or stream content to see if there’s any lag or buffering.
• If you notice any dead zones or weak areas, reposition the nodes slightly and test again.

This step helps confirm that your mesh network in bridge mode is delivering consistent internet throughout the space.

Conclusion

Setting up the Linksys Velop bridge mode setup doesn’t require advanced technical knowledge. By carefully following the steps above, from unboxing and setting up in standard mode, to enabling bridge mode and placing nodes strategically, you can enjoy expanded WiFi coverage while continuing to use your existing router. Whether you have a large home or multiple floors, the Linksys Velop bridge mode setup allows your Velop system to integrate smoothly and deliver enhanced wireless performance without disrupting your current network. 

---