Linksys RE7000 Setup: How To Add Extender?

Linksys re7000 range extender device is a widely used extender that helps in boosting the network coverage. With the addition of this device you can easily enjoy high speed internet in all over your space without replacing your existing network device. You can easily remove dead spot issues from your network. You can configure this device using WPS method or web based method. Both the linksys re7000 setup methods are easy to follow. Before configuring the device you have to install the hardware also. Step by step instructions on installing the hardware configuring using both the methods are mentioned below. You can read the further section and boost your home network very easily. 

Installation of linksys RE7000

You have to install the hardware of your range Extender device. For the hardware installation you need to unbox your range Extender. RE7000 is a wall compact device so you don’t need a separate place to keep it. Near your host router device you have to connect it with the wall socket. After that, turn on the power from the socket. Switch on the power button on the extended device and wait for the device to turn on. When the device LED gets stable and solid green in colour then you can proceed with the setup using any of the below given methods.

RE7000 setup via WPS

Performing the Linksys RE7000 Setup using the WPS method is super easy. You just need to locate the WPS button on your extender device and the router device. Press the button on the extender and thereafter on the router within 2 minutes. If you fail to press the button on both the devices within 2 minutes then your process will fail. On the other hand if you do it then your process will be a success. Your device WPS LED turns into solid green colour which signifies that the process is done successfully. If your router device doesn’t support the WPS method of connection then you have to proceed with the web based method which involves a little technicalities.

RE7000 setup via Web

Web based Linksys RE7000 Setup requires a client device to perform the setup. Connect your client device with the extender network first. Thereafter you have to launch a web browser to access the setup page. Use the web address extender.linksys.com or IP address 192.168.1.1 to open the setup page. As the setup page appears use the standard login details to enter the dashboard. Now you have to choose your router Network from the list and then enter its password to connect both the devices. Also you have to create a separate network name and password for your Extender device network. Submit all the changes done by you and then relocate your extender device. 

Connect Us

You can connect us on the given number below if you are facing any difficulty with the Linksys RE7000 Setup process or installation of hardware devices. In addition to this our technicians will help you in boosting the network, troubleshooting the common issues and enjoy better performance.

---