Seamless Linksys Re1000 Setup: Quick And Reliable

Linksys has completely changed the overall networking scenario. It offers a vast variety of wifi range repeaters that effectively provides wider coverage and seamless connectivity experience. One such masterpiece from its vast collection is Linksys Re1000 setup. Its simple wall plug design in addition to compatibility with all standard routers makes it convenient to add in any area of the abode and use with any standard router. Moreover with the availability of an Ethernet port and smart LED light reflectors, the range extender is worth spending every penny. So the users who are looking for a simple Linksys Re1000 setup guide, can rely on this one. 

Installing Linksys Re1000 Range Extender 

First as you unbox the package contents of your Linksys Re1000, you will receive a setup CD. This CD is very crucial. So what you need to do is, insert this CD into your laptop or a computer system. Ensure this device is connected to your router’s network. 

Moving forward, a setup utility page will open up on your device’s screen. After you go through the licence terms, tap on Next. 

Thereafter, plug in the Re1000 into an AC power outlet. Turn it on. Just after the range extender activates properly, you’ll see a list of networks on your device’s screen. Select the network you want to use. Then tap Next. Herein put up the password. Again tap on Next.

Your Linksys Re1000 setup is complete. Now you need to relocate it to a more strategic location. For this place Re1000 halfway from the router and the area where you were facing connectivity issues. Ensure the place you choose receives at least 50 percent signals from the router. Additionally, avoid the placement in close proximity to electronic and metal devices. 

Finally, after finalizing the placement position, return back to the host device. Tap on Next. You’ll receive feedback. If the Linksys Re1000 setup placement is correct, you will receive a congratulations message. In the opposite scenario, the interface will provide help for further adjustments. As you complete it, tap on close. 

Quick Wifi Protected Setup

Users who are looking for an alternative to above Linksys Re1000 setup method, can perform quick setup through WPS. The necessity here is that the host router should also support this WPS function. 

✓ So begin the process by activating the Re1000 wifi repeater. Users need to activate it in the same area where the router is active. 

✓ Thereafter, press Wifi Protected Setup button on the signal repeater. Then on the router. When the WPS function activates, the LED light blinks slowly every two seconds. But when the Linksys Re1000 setup completes, the LED stops flickering and goes solid. 

✓ Finally, detach the extender and replug it to its final spot. Again remember, the placement spot should be halfway from the router and the area of concern. Do not plug it in a corner or congested area as well as in between thick concrete or mirror walls. Because all these placement spots will lead to poor connectivity. As you find the right spot, do not forget to check the smart LED’s color. It should be stable. If it’s flickering, then there is a mistake with the placement. Redo the placement once again. 

For any query, issues or assistance do not hesitate to connect with the experts.

---