How To Program Linksys RE6300 Wifi Range Extender?

Did you also get your hands on the Linksys RE6300 dual band wifi range extender that can offer wifi speeds of up to 750Mbps? If yes, then this blog post can help you with the Linksys RE6300 setup. The setup process is simple therefore you do not need help from any tech expert. There are two methods through which you can finish the setup. One method is for those who just quickly want to wrap up the setup within 5 minutes. It is done using the WPS button. The other one offers a more detailed approach and is done using a web browser. So now let’s get to the point. 

Setup Using WPS Button 

For Linksys RE6300 setup using the WPS button you need a router with the WPS function. Apart from that you just need access to vacant power outlets. One outlet must be near the router and the other one must be there in the center of the router and the wifi dead spot. Now check out the installation steps:

• Deploy the RE6300 signal repeater as close as possible to the router. 
• Now plug the extender into the power socket and turn it on. 
• Wait for the front smart panel to turn steady green. 
• Next, push the WPS button of RE6300. As you push it, the front indicator will start fluttering. Now you have to do the next Linksys RE6300 setup in less than 120 seconds. 
• So locate the WPS Button on the router and push it as well. The router’s smart indicator will also start flickering. 
• Finally, you now need to wait. Wait for the indicators to turn stable and all lit up. 
• Does your router support a 5Ghz network? If yes, then to extend its signals you just need to repeat the above steps once again. 
• At last as the Linksys re6300 setup is successfully done, you can deploy the extender at a strategic location. Place it in the middle of the router and the place where you need extension of the current network. For seamless flow of signals try to keep all sorts of electrical and metal objects away from the extender. 
• Once the placement completes, repower the extender and let its indicator turn green. Now pair your device to the new RE6300 network and enjoy uninterrupted connectivity in every nook of your abode. 

Setup Using Web Browser 

The WPS Linksys RE6300 setup method is no doubt quick but is usually less secure. Whereas the web browser based setup method lets you configure the device more deeply and you also get to alter the default settings for a better networking experience. So here’s the step-by-step guidance:

• First collect the basic components. You need a smart device, definitely access to the router. Thereafter an Ethernet wire (optional), access to power socket and details of your existing network. With these things you can successfully finish the installation. 
• Now deploy the RE6300 midway router and the wifi dead spot. Then activate the device. Wait for the green light to turn up. 
• Up next take the smart device and pair it up with the RE6300’s local network. Pair up either through ethernet wire or use the wireless details. Details are written on the extenders product label. 
• Thereafter, for the Linksys RE6300 setup, open up a web browser. Go to the URL column. Type http://extender.linksys.com and push the enter key. 
• Finally tap on the Start Setup option and adhere to the instructions that the interface shows you up. It will first prompt you to pick the mode. So select repeater mode. Then the scanning of all available networks will start. As your router’s SSID on the screen. Click on it and finally fill in the network password and wrap up the setup by personalizing the network details. You can also scan for the pending updates. 

If you get stuck anywhere with the installation, feel free to connect to our experts. 

---