How To Fix Linksys Yellow Light Issues?

Did you just have a quick glance at your Linksys device and you see a yellow light glowing on it and are wondering why is it suddenly there? If the answer to the above-written question is yes, then first let us tell you that Linksys yellow light is not a major concern as it can be fixed by following a few simple steps. So do not panic. No matter whether you are using Linksys router or velop system, in this blog-post we’ll provide the guidance for both so you can get back into action at the earliest. 

Now first let’s break down the Linksys yellow light meaning, then proceed towards the quick fixes. 

What Yellow Light Indicates ?

Every Linksys device be it routers, extenders or velop systems comes with smart LED indicators. The lights on these indicators depict different meanings and can be of different colors. For example, you might see a red light when there are some major technical issues with the device. On the other hand, a stable blue one on the Velop system indicates the best working of the device. So now let’s find out the meaning of Linksys yellow light on different devices. 

• Linksys Router Yellow Light

A glowing yellow light on the Linksys router often indicates that the router is having problems connecting with the internet.

• Linksys Velop Yellow Light

If you see a yellow light on the Velop system then it usually means the Velop node is not in sync with the main node or lacks internet access.

• Linksys Node Yellow Light 

Lastly, if the particular Linksys node’s LED indicator shows yellow light then it means the node is having issues connecting to the Velop router. 

Linksys Router Yellow Light Fix

Now as you are familiar with the different meanings, let’s find the quick solutions for each device. We are starting with the router. 

• First up, check the upstream device (modem). It should be active and should have a proper wired connection with the Linksys router. 
• Next up, give rebooting a chance. For this, detach the Linksys router as well as the upstream device from the power source. Now wait for around 60 to 80 seconds and then re-attach the gadgets back to their power source. This can instantly fix Linksys yellow light issue. 
• Moving further, make sure the ethernet cable that you are using is working best to its abilities. It means its connectivity to the ports shouldn’t be loose and also the wire shouldn’t have any breakage in between.
• Sometimes the problem is from the end of the Internet Service Provider. So also make sure you connect to the service provider to confirm about the internet outage in your locality.
• Lastly, remember pending updates are the major reason behind Linksys router yellow light issues. So login into the main interface of your Linksys router via 192.168.1.1 to fetch down the latest firmware version.

Linksys Velop Yellow Light Fix

Mesh systems like Velop from Linksys are the most reliable networking gadgets as of now but no matter how good and reputable the device is, it can still show up problems. So here’s the quick fix for yellow light on Linksys velop. 

• First fetch the nodes a little near to the main unit. 
• Next up, unplug the nodes and let them refresh itself. So assign it at least a minute for it. Thereafter re-activate them.
• Sometimes the initial setup goes wrong, so in that case after you perform a hard reset on the Velop unit, consider re-configuration using Linksys application.
• Last and the most important, keep the firmware of your Linksys Velop to its recently available version.

Troubleshooting Linksys Node Yellow Light

When any one particular node shows up a yellow light then this can be due to interference with the signals, too much distance between the main velop unit and also with the other node. The quick fix for it are:

• First reposition that particular node. Keep it away from unnecessary interruptions from electrical and metal objects. Common objects to avoid are microwave, security cameras, cordless phones, bluetooth devices, baby monitors, aluminium doors alongside fish tanks. 
• To improve the connection stability, we recommend using ethernet wire for connecting the node to the other node. 
• To troubleshoot Linksys yellow light issue on the Velop node you can reset that particular node. Each node has a reset button. So push it down and hold onto it till the node’s LED indicator starts to flicker. Thereafter re-add it into your Velop network. 
• Try placing other nodes in the same area as there can be chances of hardware problems with the particular node. 

In case none of the above written troubleshooting steps works in your favor then it’s high time you connect to the expert professionals. Additionally users who don’t know even the basics of technology and technical gadgets should not hesitate to directly ask for the assistance from the experts without even trying the basic troubleshooting steps. 

Final Tips for Linksys Users

Before wrapping up, here are some extra tips to avoid the Linksys yellow light problem in the future:

• First place your Linksys devices be it router, velop system or the nodes in an open area that not only offers proper ventilation but is also free from interference. 
• Additionally remember, supply of electricity to the devices should be uncut and the wirings shouldn’t be loose.
• Next up, we recommend using a surge protector. As this will help you protect your device from sudden voltage spikes.
• Users generally overlook the importance of a simple reboot. But remember a quick reboot every now and then especially after firmware updates can work magically to refresh the overall connection. 
• Moreover try to label your cables to avoid mixing up WAN and LAN ports.
• Lastly, to avoid the hassle of manual firmware upgrading, switch to automatic update. You can do so by logging into the main interface via 192.168.1.1 or use your Linksys application for the same. 

---