Linksys Velop Setup With Existing Router Step By Step

The Velop system by Linksys will perfectly suit your requirements if you intend to upgrade your WiFi range and coverage. With this system you can upgrade without removing your existing router. This guide will serve you well whether you want to get rid of dead zones or want seamless streaming and gaming all over the house. In this post, we will delve deep into the details of Linksys Velop Setup With Existing Router so that you can use them with your current home network while achieving the best results, optimal performance, and easy configuration.

What is Linksys Velop?

Let’s quickly go through what the Linksys Velop system is before jumping onto the setup. It is a modular WiFi mesh system which means that it provides full strength internet in every corner of your home. It achieves this through nodes that are placed in the required spaces that need to be connected to the internet which helps users get a high speed wireless connection. Velop works as a bridge or access point with Linksys routers to enhance range and coverage. Thus, Linksys Velop Setup With Existing Router will suit people who do not wish to change their primary router, but want improved WiFi connectivity all over the house.

Use Linksys Velop With an Existing Router

You might consider Linksys Velop Setup With Existing Router in the following scenarios:

• Already own a high performance router but need to boost signal in remote areas.
• Want to avoid replacing your ISP provided modem/router combo.
• Prefer keeping your current network settings and configurations.

Setup Checklist

Before you begin the Linksys Velop Setup With Existing Router, gather the following:

• Linksys Velop node(s)
• Existing router with an active internet connection
• Ethernet cable
• Mobile device with Linksys App installed
• Stable power supply

Make sure your existing router is already set up and working properly before you begin the Velop configuration.

Linksys Velop Setup Steps

• Plug the main Velop node into a power outlet near your existing router. Wait for the LED to blink purple, indicating it’s ready for setup.
• Make a connection between the Velop node’s Internet port to one of the LAN ports on your existing router with the help of ethernet cable. This physical connection is crucial for performing the Linksys Velop Setup accurately.
• Open the Linksys App on your mobile device. Create a Linksys account or log in if you already have one. Once signed in, the app will detect your Velop node. Tap on “Set up a New device”. Opt for “Velop” from the product list.
• When prompted, select “Add to Existing Router” or “Bridge Mode” setup. This will allow the Velop system to act as an access point, extending your current network rather than creating a new one. This is the most important setting for the Linksys Velop Setup With Existing Router.
• Even though you’re not creating a new primary network, you’ll still be asked to assign a name and password for the mesh system. This can either match your existing router settings or be unique. Using the same SSID and password as your current  WiFi network allows your devices to transition seamlessly between the router and the Velop node.
• If you have more than one Velop node, you can add them now. Place each node in a central area of your home for optimal coverage. Adding more nodes will strengthen your mesh system and enhance the effectiveness of the Linksys Velop Setup With Existing Router.
• Once the node setup is complete, the LED will turn solid blue, indicating a successful connection. The app will display a confirmation message, and you’re done!

Tips for Network Boost

Avoid Double NAT

If your existing router also uses NAT, and your Velop is not in Bridge Mode, it can cause network conflicts.

Place Nodes Strategically

Avoid placing Velop nodes near thick walls, microwaves, or cordless phones to reduce interference.

Firmware Updates

Check for firmware updates via the app to ensure your system runs efficiently.

Troubleshooting Common Issues

During your Linksys Velop Setup, you may face minor hiccups like:

• Velop not detected: Reset the node and try again.
• Slow speeds: Ensure the node is connected via Ethernet and not too far from the router.
• No internet: Confirm your existing router is working and restart both devices.

While these problems are uncommon, following the correct steps will usually prevent or solve them quickly.

Final Thoughts

Linksys Velop Setup With Existing Router allows you to keep your current router while enjoying the benefits of a powerful mesh system. Whether you live in a large house or have thick walls that weaken signals, Linksys Velop ensures reliable connectivity everywhere. By following the above step by step guide, you’ll have your Velop system up and running in no time. From improved  WiFi coverage to smoother device roaming, the Linksys Velop Setup transforms your digital experience without needing to overhaul your existing setup.

---