Maximize The Linksys Extender Performance With These Points

Are you looking for some guidance to improve the extender’s performance after doing the Linksys extender setup successfully? As it is mandatory to apply some useful points to get the extender’s optimized performance every time to enjoy the network to the fullest. So, we are here with some consideration points that you can try out to improve the extender’s working.

Choose The Ideal Placement For The Extender

After configuring the extender perfectly, you can relocate the extender to a different place where you face the slow speed of the internet. Doing so will help you to eliminate the WiFi dead spots from your place. But make sure that the extender is within the router’s range and get enough internet signals from it.

More than that, your extender must not be close to metallic and other electrical appliances which can absorb signals. So, keep these things away from the extender to avoid signal interruptions. It is reckoned to choose the center location of your house to place the extender. As a result, there will be better internet coverage throughout every corner.

Change Advanced Settings

As you complete the Linksys extender setup process, the management portal will appear on the next page. From there, you can monitor the extender working and manage its network as well. Check the frequency bands of the extender whether these are activated or not. Moreover, swap the bandwidth channels of the extender as you desire.

Make A Guest Network

Linksys provides a guest network feature in its devices, through which you can create a separate guest network for other users. Doing so will allow your network to have limited access to it. Clearly, you will not need to share your official network with external users which can create the speed sluggishly.

Change Network Name And Password

While making the guest network, if you find any unauthorized user on the network then, it is necessary to remove that. To do that, change the network password and set a strong one this time. As you do this, those external users will be logged out of your network. Make sure to set the password that will be hard to guess.

Remove Additional Devices

No doubt, the more devices are networked, the lower the internet speed. So, try to discard the connection from those devices which are not in use currently. Only keep connected to the device that you are using right now. After doing this, you will surely see an improvement in the extender’s working.

Keep The Firmware Updated

To get the extender’s working optimized from its technical end, update its firmware version on time. As these technical things require the latest software to work optimally. To do this, visit the Linksys extender setup portal and check the latest version there. Download that file on your PC and save it safely.

Meanwhile, disconnect your other devices that are networked currently and let the PC connect. Later, visit the management page again and carry out the updating process after uploading the file. After doing this, reboot the extender once if required, and check it is working after connecting your device.

Check Connectivity Often

For better working of the extender, it is mandatory that your devices remain connected well to the network. As if your extender is working properly and there is a weak connection then the internet could be slow. So, ensure your device is connected to your own network with strong signal strength.

Apart from that, the ethernet wires in the wired connections must not be broken from any end. Also, the cables must be original that you get with the extender. If you find any broken wire then replace that immediately. Use the latest one this time for getting strong and stable connectivity.

Discard The Configuration Settings

If none of the above-mentioned solutions work for your extender to provide maximized performance, then configure it again. To discard the older settings, reset the extender once. Go to the management portal of the extender and choose the Factory Default option to reset the extender.

On the contrary, press and hold the reset button on the extender’s panel. Keep checking the light on the extender as the blinking light will notify you of the process if going on. When the light turns stable, the process will be complete. Finally, reconfigure the extender by using its details perfectly.

Doing so and implementing these points will enable you to achieve the fastest internet signals and speed. If the network is still working slowly, then let our experts do that for you. Take more guidance from them and apply those points to the extender.

---