Two Simple Methods To Conduct Linksys RE7000 Setup

Users who are facing the problem of dead zones, slow wifi speed, and sudden connection drop should install a wifi range extender at their place, be it office or home. The installation will instantly revive your weak wireless network to powerful performance. When it comes to wifi signal repeaters one name that tops the list is Linksys. Linksys offers a vast variety of range extenders for different needs. So in this guide we’ll be sharing the details about Linksys RE7000 setup. This blog post will cover everything from RE7000’s features, setup requirements, setup guidance to reset process. Moreover the guide is kept simple so that even a non-tech buddy can also seek help from it. So for full insights, keep on reading.

Linksys Extender Setup RE7000 Features 

The RE7000 repeater comes loaded with vast features.

• It operates on two frequency bands. One is a 2.4Ghz band. The other one is a 5Ghz band. Both bands offer wider coverage and high speeds respectively.
• Thereafter its MU-MIMO technology makes it a perfect option for those homes and offices that have multiple smart gadgets and therefore require wifi for their working. 
• To be precise the RE7000 wifi signal booster can easily eradicate dead zones from an area of upto 10,000 sq.ft. 
• Further, the spot finder feature makes the Linksys RE7000 setup much more easier and less time consuming.
• With a seamless roaming feature you need not worry about connectivity, while you are moving from one room to the other. 
• Moreover, RE7000’s simple direct plug in design doesn’t take up extra space in your abode and thus mix up well with your interiors. 
• Last but not the least, the RE7000 range extender features a smart LED indicator on its front panel which again helps with understanding the exact working of the device.

Note: Linksys extender setup RE7000 works with every standard router, so you need not invest in a new one. 

Linksys RE7000 Setup Requirements 

For Linksys extender setup RE7000 you need following components:

✓ A router and active internet connection.

✓ Next, a smart device with wifi functionality. You can use your cellphone, laptop, computer or even your iPad for the same. 

✓ Note down the details of your existing wireless network. 

✓ Thereafter, you need an Ethernet wire if you wish to use the RE7000 in AP mode. Also if you prefer wired connection over wireless connection then ethernet wire is essential.

✓ Lastly, you require a few default details for conducting the Linksys RE7000 setup. Therefore keep the Linksys re7000 manual by your side. 

Steps To Install The RE7000 Range Extender

To make the setup easy to understand, we have broken down the process into various steps. So here you go:

• Plot the RE7000 in an area which you consider halfway from the router and the dead zone area. Although, later you can adjust the placement by leveraging Spot Finder technology.
• Now move the device into the working power board. Turn it on. 
• Initially the front panel light will blink, so you need to hold on till it stabilizes.
• Thereafter, look for the wireless details of RE7000. It is written in the Linksys RE7000 manual and also on the extender’s bottom side. 
• Therefore, take your wifi enabled device. Using the information that you grabbed in the previous step connect to the RE7000. Alternatively you can make use of an Ethernet cable if you prefer wired connectivity.
• Next up, open the internet browser. You can select between internet explorer, chrome, firefox, safari or edge, as choosing the compatible browser is crucial for errorless Linksys RE7000 setup. 
• Additionally, clean up the browser’s cache and cookies folder before proceeding to the next step. As this can create a hindrance with the login. 
• Now jump towards the browser’s address field. In it, put up http://extender.linksys.com. Press enter key. Sometimes the above-written address doesn’t work. So in that case try opening up the main page via 192.168.1.1. 
• You’ll now get an option of Start Setup. Tap on it. Choose one setup method (AP/Repeater). 
• Finally for completion of linksys extender setup re7000, follow the guidelines as the web interface shows you on your screen.

Installing Linksys RE7000 Using WPS Method 

If you are a beginner and do not understand the tech world that much then no need to panic. Because the WPS setup method can help you with the quick installation. 

So first up bring the RE7000 near the router. Find a vacant power socket nearby. Plug the extender into it. Turn on. Hold on for the front side indicator to show a stable light. As you see it immediately press the wifi protected setup button on the extender. Take a turn towards the router, repeat the same on it as well. The WPS light starts to flicker. This indicates the commencement of the setup process. Now all you have to do is wait, till the light stops flashing and rather turn stable, thus showcasing a successful Linksys RE7000 setup. Finally, you can re-adjust the plotting of RE7000 as per your requirement. Just make sure the placement area that you select gets above 50 percent signals from the router. 

Linksys RE7000 Reset Process 

Want to revert your RE7000 device back to its factory settings or there is a technical glitch that you want to resolve? No matter what the concern is, reset will turn out to be the saviour. But before you proceed remember it should never be the first option, rather when everything else fails to solve the issue only then take a recourse to factory reset. As repeated use of it can hamper the device’s working. This is how you can reset your RE7000:

• Activate the device.
• Put in a sturdy toothpick or sim ejector pin into the reset port.
• Push the object downwards. Hold on till the indicator starts flickering. Usually it requires six to eight seconds. 
• Finally upon release the extender resets. 

For any other query, feel free to connect with our experts. 

---